Sticker HOME-FIX SK-3S/334 White - Clear

• Made from plastic PVC (Polyvinylchloride) with a tight weight, durable, worth the money for a long time.
• How to use 1. Clean the surface before installation.
• 2. Mix water with liquid soap or light shampoo into the water spray. To spray on the glass surface and glue sticker that peel off the paper and get wet So that the sticker can move in the desired position more easily.
• 3. Sticker down from one end, stroking to the other side. And use a brush to squeeze or ruler, water and air out of the top to bottom (if the bubbles occur Use a small needle to drill and then rub out the air. Will get a beautiful, beautiful surface.
• Recommendations After the installation may cause white blemishes Or water stains on the stainless steel. Should be left for 7-10 days. The marks will decrease and fade away.
• The rear glue
• size 45 x 200 cm
• White -clear

How to use

1. Clean the surface before installing the sticker.
2. Mix water with liquid soap or mild shampoo in a spray bottle. To spray on the glass surface and on the sticker, the adhesive side that has been removed, wet it so that the sticker can move in the desired position more easily.
3. Stick a sticker down from one end and run to the other. and use a water brush or ruler to remove water and air from top to bottom (If there are air bubbles, use a small needle to pierce and rub the air out. will get a beautiful smooth surface)

Additional recommendations

• After installation, there may be white blemishes or water stains on the installed stickers, should be left for about 7-10 days, the marks will decrease and fade away on their own.

Remark : The color of the product shown on the website There may be differences from the color display settings of each screen.